Bild
Title image industry page HUBTEX Cable drum

Drum transport

HUBTEX cable drum transporters are specially designed for the handling of heavy coils for cable and pipe systems with a load capacity up to 132,000 lbs and are always specified to the respective application. Drums with a diameter of 197 in and a width of up to 138 in can be handled. The transporters are designed for indoor use and combinable outdoor use. The special requirements include the high point load due to the small contact area of the coil flanges, the different coil widths and the individual warehouse situation.

Load handling variants

Swivel-mounted pick-up traverse
The HUBTEX drum transporter with swivel-mounted pick-up traverse
Picking up drum via swivel-mounted pick-up traverse.

HUBTEX drum transporter with swivel-mounted pick-up traverse

With our drum transporter with swivel-mounted pick-up traverse, the load is pulled onto the pick-up ramp of the vehicle with the aid of cables and bolts.

Pick-up prism with frame lift
The HUBTEX drum transporter with pick-up prism and frame lift
Picking up drum via frame lift.

HUBTEX drum transporter with pick-up prism and frame lift

To pick up the load, it is completely straddled by the drum transporter, which then encloses it and finally lifts it using the integrated lift in the frame.

Lifting spindles
Drum picked up on spindles.
The HUBTEX drum transporter with lifting spindles

HUBTEX drum transporter with lifting spindles

Once the vehicle has straddled the drum, the spindles are inserted into the hub bore of the drum and the drum is then finally lifted.

Anwenderberichte

Das sagen unsere Kunden und Partner
über unsere Produkte und Dienstleistungen.

Pipe transporter used at Brugg

Owing to the pipe drums having become heavier, both the old special transporters in use at Brugg Rohrsysteme (Switzerland) had reached their limit. The susceptibility to breakdowns increased, the downtimes were longer as well and the productivity was unsatisfactory. Therefore, Brugg commissioned the specialist from Fulda, Hubtex, to find a new solution in the form of a special machine for moving up to 12 t of heavy pipe drums. Just six months passed from the first idea, through the intermediate in-spection and up to final shipment.

Presentation of our KT 300 drum transporter

Downloads