Bild
Titelbild EZK von HUBTEX
Order picking on
both sides
of the rack
High rate
of turnover
 
Narrow rack
aisle width
 

Electric

multidirectional

order picking platform
by HUBTEX

The electric two-sided order picking platforms of the EZK series are solely order picking platforms. Whether in the 2-mast or scissor lift version, they enable the picking of profiles up to 8 m in length. The goods can be easily picked from either side of the rack aisle. A load shifting device is optionally available for both models to facilitate the removal of the customer consignment by a separate lift truck.

EZK two-sided order pickers 

In order to pick profiles quickly and without damage, manufacturers and dealers need an order picking system adapted to the individual requirements of the respective warehouse. With the help of a vehicle concept especially adapted to your needs and requirements, all areas of application can be mapped with the order picking platforms from HUBTEX.
In its basic version, the platform solution from HUBTEX is suitable purely for picking pipes and profiles on both sides of a rack aisle. Two operators stand on the platform and pick the long loads manually. Once the consignment is ready, stacking in this case is with multidirectional sideloaders. In the next expansion stage, the vehicles can optionally be equipped with telescopic tables which stack the consignment in the rack system and enable the direct transfer to the next production stage. Consequently, no additional lift truck is required to unload the goods, meaning that the rack aisles can be particularly narrow if required.

Unser EZK verlässt das Werk in Fulda

Fast wie in Watte gepackt sieht er aus. Damit bei dem Transport zum Kunden auch wirklich nichts passieren kann, geben unserer Versandmitarbeiter alles. Von Straßensperrungen bis hin zu Fahrzeugen die unsere Schwerlasttransporte begleiten, bei der Auslieferung unserer Stapler achten wir auf jedes noch so kleine Detail, sodass diese beschädigungsfrei bei unseren Kunden ankommen.

Features

2-mast version
Die HUBTEX-Kommissionierplattform als 2-Mast-Version

The 2-mast version of the HUBTEX order picking platform is especially characterized by its low platform height. This offers benefits when accessing the lowest rack level.

Scissor lift version
Die HUBTEX-Kommissionierplattform als Scherenhub-Version

In contrast to the 2-mast version, the advantage of the scissor lift version is its shorter overall length. For this reason, order picking platforms with a scissor lift system can be operated in significantly narrower spaces. Thus, the width of the transfer aisle can be reduced.

Multidirectional steering
Displayanzeige der Elektro-Mehrwege-Kommissionierplattform von HUBTEX

HUBTEX sets innovative standards with the HX multidirectional steering system. Using the optionally available omnidirectional steering system enables the trucks to change without stopping from longitudinal to transverse drive. This lessens the time needed to switch wheels, provides excellent maneuverability and reduces wear on the wheels. 

Control station
Der Fahrerstand der Elektro-Mehrwege-Kommissionierplattform in der Stehvariante

You can choose different variants for operating the vehicle. It can be equipped with one or two control stations. When equipped with two control stations per vehicle, the advantage is the best possible overview in each driving direction. Moreover, the operator can choose between two different configurations of the control station. Standing in main driving direction, or seated, facing the load (only in combination with a personal protection system).

Telescopic tables
Der HUBTEX-Zweiseiten-Kommissionierer mit Teleskoptisch-Ausstattung

HUBTEX two-sided order pickers can be optionally equipped with telescopic tables for the transfer of the completed consignment. In this way, a finished pack can be passed on to a transfer station from both sides of the order picking vehicle.
 

Scissor lift
Scherenhubplattform auf einer Elektro-Mehrwege-Kommissionierplattform

As an option, the HUBTEX order picking platform can be equipped with a scissor lift on the platform to facilitate the ergonomic picking of goods. Thus, the stacking height on the vehicle can be individually adjusted, avoiding unnecessary bending or stooping by the operator.

We know the best solution.

We know that the handling of long goods presents users with special challenges. Arrange a non-binding consultation appointment with our specialists to find the best possible solution for your application.

Die HUBTEX Elektro-Zweiseiten-Kommissionierplattform in der 2-Mast-Version

Die 2-Mast-Kommissionierplattform zeichnet sich besonders durch die niedrige Plattformhöhe aus, was Vorteile in der Bedienung der unteren Regalebenen mit sich bringt. 

Die HUBTEX-Zweiseiten-Kommissionierplattform beim Einfahren in einen Regalgang

Bestmöglichste Übersicht garantiert – da unsere Elektro-Zweiseiten-Kommissionierplattformen wahlweise mit zwei Bedienständen ausgerüstet werden können, ist in jede Fahrtrichtung eine optimale Übersicht möglich. 
 

Das übersichtliche Multifunktionsdisplay von HUBTEX

HUBTEX setzt mit der Weiterentwicklung des HUBTEX Informationsterminal seinen Weg in Richtung Industrie 4.0 konsequent fort. Als Bestandteil aller Mehrwegestapler informiert das neue HIT3 über alle relevanten Betriebszustände. Auf dem Multifunktionsdisplay mit seiner neuen Visualisierung stehen dem Fahrer sämtliche Informationen zu Radstellung, Geschwindigkeit und Batteriezustand der Kommissionierplattform in einer einfachen grafischen Darstellung zur Verfügung. 

Abkommissionieren der fertig kommissionierten Ware über eine Zwischenstation

Optional ist für beide Modelle (2-Mast-Kommissionierplattform & Scherenhub-Kommissionierplattform) eine Verschiebeeinrichtung erhältlich, um die Entnahme der fertigen Kunden-Kommission mit einem separaten Stapler zu erleichtern.

TECHNICAL DATA

Series EZK (scissors)

Load capacity 3.0 to 6.0 t

Load bed width 600 to 1200 mm

Lift height up to 10000 mm

Frame length up to 9000 mm

PU / EL Tire equipment (optional)

80 V Battery voltage

Driver’s stand cab

Series EZK (lift mast)

Load capacity 3.0 to 6.0 t

Load bed width 600 to 1200 mm

Lift height up to 10000 mm

Frame length up to 10000 mm

PU / EL Tire equipment (optional)

80 V Battery voltage

Driver’s stand cab