MQ 30 unloading a bobsleigh
Storing a bobsleigh
HUBTEX MQ 30 loading platform with a bobsleigh
Bobsleigh in front of the roller shutter
MQ 30 unloading a bobsleigh
Storing a bobsleigh
HUBTEX MQ 30 loading platform with a bobsleigh
Bobsleigh in front of the roller shutter

 

Picking bobsleighs with the HUBTEX MQ 30 SO

Loading platform for one-sided transfer of bobsleighs to and from racking 

  • Load capacity iconLoad capacity: up to 3 tonnes  
  • Loading platform iconPutting bobsleighs into storage and retrieving them 
  • Load-ManagerHUBTEX-Load-Manager (HLM)

The HUBTEX ESTL MQ 30 SO was designed to place bobsleighs into and retrieve them from pallet racks fitted with roller tracks. Each bobsleigh rests on two roller tracks and is guided lengthways by its runners or runner protectors. The maximum bobsleigh weight is 300 kg. Two types are handled: runner grippers pull type 1 from the rack by its front runner suspension; hook grippers pull type 2 (Swiss Bob) by its central towing lug. Flap hooks allow the loading platform to be changed quickly.

Request a quote

Cloudflare Stream

Olympia Bob Run St. Moritz-Celerina

Modern technology for the oldest bobsleigh run

The Olympia Bob Run St. Moritz-Celerina, the world’s last natural-ice bobsleigh track, uses a HUBTEX MQ 30 to store its bobsleighs. The truck carries them between storage and the 1,722-metre track. The storage area is 60 metres long and extends 15 metres into the mountain. Its two levels hold a total of 75 bobsleighs. Making efficient use of the space has reduced staffing requirements.

Features

Special loading platform
Specialised loading platform

HUBTEX equipped the MQ 30 with an additional loading platform and a push-pull device. The feed mechanism pulls the bobsleighs out by their runner protectors or grips them at a towing hook, then places them on the platform for transport to the track. Pulling a bobsleigh onto the platform takes the driver about one minute; taking it to the start area takes two minutes. The platform can be removed outside the season so the truck can operate as a conventional multidirectional sideloader.

HUBTEX-Load-Manager (HLM)
Hubtex Load Manager Sensor

The HUBTEX Load Manager helps the driver monitor lift height. Up to 99 lift heights can be stored for putting bobsleighs into storage and retrieving them. A laser sensor determines the heights, supporting safe operation.

Inductive guidance system
Inductive guidance for bobsleigh handling

Unlike mechanical guidance, the inductive guidance system (German) actively steers the truck and provides a safety clearance of 150 mm on each side. Antennas in the wheel arms guide the vehicle along a wire in the floor. The truck is steered accurately into position before entering the rack aisle, preventing damage to the truck or racking.

Roller shutter sensor
Bobsleigh storage roller shutter

A safety concept developed by a Swiss door manufacturer ensures that the roller shutter opens only when the extended MQ 30 platform is at exactly the same height as the door. The truck can move away only after the shutter has been closed again following removal of the bobsleigh.

Bobsleigh in use

Bobsleigh on the Olympia Bob Run.

Bobsleigh being picked up

A bobsleigh is collected from the run for storage.

Bobsleigh in front of the roller shutter
Hatch to the start area

A bobsleigh is pulled through the hatch to the start area.

Bobsleigh loading platform

Loading platform for bobsleigh order picking.