VTF backfill transport vehicle operating in a quarry
Rear view of the VTF backfill transport vehicle for BGE
BGE VTF backfill transport vehicle on a rocky route
Side view of the VTF backfill transport vehicle for BGE
VTF backfill transport vehicle operating in a quarry
Rear view of the VTF backfill transport vehicle for BGE
BGE VTF backfill transport vehicle on a rocky route
Side view of the VTF backfill transport vehicle for BGE

VTF backfill transport vehicle

For BGE

The VTF is a special vehicle developed by HUBTEX for the Bundesgesellschaft für Endlagerung (BGE). It is intended for later underground use at the Konrad repository project, a former mine being converted into a repository for low- and intermediate-level radioactive waste.

After the waste has been placed in the disposal chambers, backfill materials, including backfill compound and thick slurry, are used to fill the underground spaces. The VTF transports these construction materials from underground preparation to their points of use and transfers them in a controlled manner to the subsequent work steps.

Request a quote

VTF backfill transport vehicle operating in a quarry

Intended use at BGE

BGE is converting the former Konrad mine into a repository for low- and intermediate-level radioactive waste. After the radioactive containers have been placed in storage, underground areas are to be filled with backfill material. This is intended to permanently enclose the stored waste and prevent its release. The work requires vehicles suited to the routes and the requirements of the controlled area.

The VTF is intended to travel between the underground backfill preparation plant and the destination. At the loading point, backfill compound is transferred into the mixing drum and carried to the point of use. There it is discharged through a chute into the hopper of the spraying manipulator vehicle. Depending on the work step, thick slurry can also be introduced through ventilation boreholes for backfilling.

Supporting safety-related procedures in the controlled area

Underground operations follow defined requirements and procedures. The VTF is designed to support those conditions in the controlled area and supply the materials needed for the intended process.

Controlled material transfer

Discharge at the point of use is planned as a defined transfer step. Backfill compound passes through the discharge chute into the hopper of the spraying manipulator vehicle, providing the interface for the next operation.

Protection and fire safety underground

For underground operation the VTF has two shielded, air-conditioned driver’s cabs from which switching operations can be performed. A fire suppression system is also planned. These features are matched to use in the controlled area.

Features

Articulated vehicle concept
Articulated joint of the VTF backfill transport vehicle

The VTF is a trackless mining vehicle with an articulated oscillating joint, intended for travel along underground routes. The engine frame and load frame are connected by the joint. Steering changes the articulation angle, matching the vehicle’s intended movement through the underground route system.

Mixing drum for backfill compound
Mixing drum of the VTF backfill transport vehicle for BGE

The construction material is loaded into a mixing drum and kept moving during transport. Backfill compound enters the drum at the loading point; at the destination, the mixture is discharged through a chute as a defined handover to the next work step.

Two shielded cabs
Upper cab of the VTF backfill transport vehicle

The vehicle has a shielded upper cab and a shielded lower cab. Both are air-conditioned and designed for underground use. Switching operations can be performed from either cab; their shielded construction supports the requirements for work in the controlled area.

HDR fire suppression system
HDR fire extinguisher on the BGE VTF vehicle

An HDR fire suppression system is planned for underground use. It is intended to combat fires at their initial stage and forms part of the vehicle’s overall fire protection concept.

Vehicle specification

Vehicle weight: approx. 31.5 t

Payload: 20 t

Length: approx. 10,500 mm

Width: 2,400 mm

Height: approx. 3,500 mm

Diesel engine

Travel speed: 3.47 m/s

Downloads