Bild
HUBTEX tool changers

Heavy-Duty Die Handlers and Powered Die Carts

Transport, lift and position heavy press dies with HUBTEX. Our electric die handlers combine a lifting platform with powered push/pull transfer for die changes in stamping and pressing operations. Each vehicle is configured around your dies, press interface and available operating space.

Up to 143,000 lb capacity · Low platform heights · Precise positioning

Discuss Your Die Handling Application

Low platform heights for heavy dies

Heavy dies and limited clearance call for a vehicle designed around the application. HUBTEX combines a compact chassis with low platform heights to reach beneath dies while supporting high loads. Vehicle dimensions and load-wheel arrangements are adapted to the handling requirements.

Controlled transfer at the press

The lifting platform positions the die at the required transfer height. A docking arrangement aligns the vehicle with the press bed, while a powered push/pull system transfers the die.

Depending on the configuration, transfer uses a push-chain mechanism or spindle drive. Positioning assistance can include a line laser, lift-height indication and distance display.

Operation suited to your plant

Choose a driver station or cab for travel through the facility, remote control for visibility during die changes, or a combination of operating methods. Multidirectional steering helps maneuver the vehicle in confined areas.

Support quick die changes at your press

A die change involves more than moving the load. The die must reach the press, align with the transfer surface and move into position.

A HUBTEX die truck brings transport, lifting, docking and powered transfer together. Discuss your existing quick die change process with us so the vehicle can be specified for its role in the changeover.

The control panel of a HUBTEX tool changer.

All functions of the vehicle can be controlled via the control panel.

The vehicles have multidirectional steering.

HUBTEX vehicles are equipped with multidirectional steering.

The HUBTEX vehicles have double tires.

The vehicles have a large steering angle.

The tools are adapted to different tool dimensions.

The HUBTEX tool changers can be adapted to a wide range of tool dimensions.

A tool changer with attached tool platform.

HUBTEX tool changers can be equipped with a range of attachments.

The vehicles are equipped with a spindle drive or a push/pull chain.

HUBTEX tool changers can be equipped with a spindle drive or a push/pull chain system.

This HUBTEX tool changer is equipped with thrust rods.

The thrust rods are used to pick up and lower the tool.

HUBTEX tool changers can pick up loads weighing up to 65 tons.

HUBTEX tool changers can transport loads weighing up to 65 tons.

This HUBTEX tool changer has a driver’s stand.

The vehicles can be operated via a driver's stand or a sit-down cab as well as via radio remote control.

WWT die handler models

ModelSeriesCapacity, approximatelyCapacity, metric
WWT 100400522,000 lb10 t
WWT 150451033,000 lb15 t
WWT 200451144,000 lb20 t
WWT 300451266,000 lb30 t
WWT 400452088,000 lb40 t
WWT 5004521110,000 lb50 t

Capacities shown are maximum model ratings; pound values are rounded equivalents. The wider product family offers configurations up to approximately 143,000 lb (65 metric tons). Capacity, platform dimensions and lifting range depend on the vehicle specification.

Specify the right die handler for your application

Start with the load and the press interface. Share the following details with HUBTEX North America:

  • Maximum die weight and dimensions
  • Press-bed height and required lifting range
  • Die transfer method and docking requirements
  • Travel routes, aisle widths and available maneuvering space
  • Preferred operator controls

We can then discuss a powered die cart configuration suited to your handling and changeover requirements.